一、高速飞刀混合机:高速飞刀混合机是在运动的料桶上设置高速飞刀叶片，在粉体进行重力扩散混合的基础上用高速飞刀剪切、击打粉体，把粉体中的板结颗粒和黏性颗粒分散开，还可以解决纤维与粉体之间均匀混合的难题。

1、料桶360°转动，混合时无死角，实现物料的充分对流、扩散混合，高速飞刀叶片能将抱团颗粒、纤维分散开；

2、料桶采用双法兰、密封圈、可靠螺栓组件压紧连接结构，料筒可在最大直径处打开，连接处采用铰链结构，打开料桶简单、轻松。内部飞刀叶片可拆卸，清理时无任何阻碍，清洗、维护更方便，更彻底；

3、混合机根据物料性质、启动方式、以及搅拌方式配置不同动力、不同功率、不同输出转速的驱动装置。

二、双动力混合机：杰创双动力混合机是目前市场上较高效的混合设备，它的理念是让混合机的料筒旋转起来对物料进行重力扩散混合的同时，还让内置的全尺寸叶片组独立自转，以相同的方向，不同的转速对物料进行强制剪切混合，从而大幅度提高混合效率。

1、两套动力系统，分别驱动叶片和料筒转动；

2、料筒360°转动，物料混合无死角；

3、料桶内部全尺寸双层螺旋叶片，转速快于料筒转速，促使物料精细化混合；

4、料筒和叶片可以单独旋转，针对流动性差的粉体，出料时，可以转动内部的螺带叶片，辅助出料。针对喷液物料，可以轻松实现，边搅拌边喷液，混合更均匀。

1、 High-Speed Flyblade Mixer: The high-speed flyblade mixer features rapidly rotating blades installed on a moving drum. It enhances powder mixing through gravity diffusion while simultaneously shearing and impacting the powder with high-speed blades to disperse clumped and sticky particles. This technology effectively addresses the challenge of achieving uniform blending between fibers and powders.

The material barrel rotates 360°, eliminating dead corners during mixing to achieve thorough convection, diffusion, and blending. High-speed rotating blades can disperse clumped particles and fibers;

2. The material hopper adopts a double-flange, sealing ring, and reliable bolt assembly compression connection structure. The barrel can be opened at the maximum diameter, and the connection uses a hinge mechanism, making it simple and effortless to open the hopper. The internal flying knife blades are detachable, ensuring no obstructions during cleaning, allowing for easier and more thorough cleaning and maintenance;

3. The mixer is equipped with drive units of varying power and output speeds, configured according to the material properties, startup method, and mixing mode.

II. Dual-Power Mixer: The Jiechuang dual-power mixer is currently one of the most efficient mixing devices on the market. Its concept involves not only rotating the mixing drum to achieve gravity diffusion mixing of materials but also enabling the built-in full-size blade set to independently rotate in the same direction at different speeds, thereby subjecting the materials to forced shear mixing. This significantly enhances mixing efficiency.

Two power systems drive the rotation of the blades and the barrel respectively;

The barrel rotates 360°, ensuring thorough material mixing with no dead corners;

3. The internal double-layer spiral blades in the material barrel are full-sized, with a rotation speed faster than that of the barrel, promoting fine material mixing;

4. The barrel and blades can rotate independently. For powders with poor fluidity, the internal ribbon blades can be rotated to assist in discharge. For liquid-sprayed materials, it is easy to achieve simultaneous stirring and spraying, resulting in more uniform mixing.